User's Guide

60 of 64
CBRS Survey UE – User Guide
UG01287 v0.6 December 1, 2020
names and surnames according to US census data, popular English words from
Wikipedia and US television and movies and other common patterns such as dates,
repeated characters (aaa), sequences (abcd), keyboard patterns (qwertyuiop) and
substitution of numbers for letters.
Login attempt limit
Set the number of unsuccessful log in attempts that are allowed before the login lock
applies (see next item).
You can choose 3, 4 or 5 login attempts.
The default is 3.
Login lock duration
Set the time users must wait before they can attempt to login after reaching the login
attempt limit, see previous item above.
The duration can be set from one minute to ten minutes.
The default is one minute.
Session timeout
Set the time in seconds that the system must remain idle before it automatically logs
out.
1800 seconds (30 minutes) is the default.
You can choose a time between 300 seconds (5 minutes) and 3600 seconds (one
hour).
Telnet/SSH account
Username
Displays the Telnet/SSH.username. This may not be changed.
Password
Enter the desired Telnet/SSH password.
Confirm password
Re-enter the desired Telnet/SSH password.
Table 11 - Administration configuration options
Accessing the antenna configuration pages remotely
To access the antenna’s configuration pages remotely:
1 Open a new browser window and navigate to the WAN IP address and assigned port number of the
antenna, for example http://123.209.130.249:8080
Note – You can find the antenna’s WAN IP address by clicking on the “Status” menu. The WWAN IP field in the WWAN
Connection Status section shows the antenna’s WAN IP address.
2 Enter the username and password to login to the antenna and click Log in.
Note – To perform functions like Firmware upgrade, device configuration backup and to restore and reset the antenna to factory
defaults, you must be logged in with the root manager account.
Reboot
The reboot option in the System section performs a soft reboot of the antenna. This can be useful if you have
made configuration changes you want to implement.