Installation Guide

IFWA-661 Outdoor Wireless Antenna Installation Guide
10 of 63
v1.0 September 20, 2019
© NetComm Wireless 2019
Installation considerations
As the Outdoor Wireless Antenna is aligned specifically for a property, please take note of the following when
installing the equipment:
After alignment, do not move, place anything in front of, or adjust the position of the Outdoor Wireless
Antenna since this will likely have a negative impact on the signal quality and performance of the wireless
service.
Keep trees and branches away from the Outdoor Wireless Antenna.
The equipment must be protected from running water, steam and excessive heat and must be installed
according to the guidelines in this document.
The Antenna Power Supply (POE-03) and Wi-Fi Gateway must be installed in a well-ventilated area and near
a dedicated power outlet which allows easy visibility of the indicator lights.
If an existing customer has carried out external construction work on the property, the antenna may need to
be re-aligned to ensure the installation is still operating at peak performance.
The Outdoor Wireless Antenna location is determined by radio frequency performance and it may not be
possible to relocate the antenna when moving to a new property. It is advised that a site survey be
conducted before initiating the installation process.