Installation Guide

IFWA-661 Outdoor Wireless Antenna – Installation Guide

19 of 63

v1.0 September 20, 2019

5 Place the ferrule over the Ethernet cable as shown, making sure that the “teeth” are facing the nut.

Figure 16 - Ferrule placed over Ethernet cable

6 Place the rubber seal over the Ethernet cable with the wide end toward the RJ45 plug. See the image below

for the correct orientation.

Figure 17 - Rubber seal placed over Ethernet cable

7 Push the ferrule over the rubber seal to prevent it from coming apart.

Figure 18 - Ferrule placed over rubber seal