Installation Guide

IFWA-661 Outdoor Wireless Antenna – Installation Guide
36 of 63
v1.0 September 20, 2019
© NetComm Wireless 2019
Installation flow – Site survey
To find the correct position and orientation at site to install the antenna.
1 Data Entry
2 Network Scan
3 Move to New Location (Capturing QR Code)
4 QR Code Screen
5 Move to New Location
Installation flow - Post site survey
After confirming the installation position on site, including manual mounting of antenna, the following steps finalize
the installation process.
1 Data Entry
2 Network Scan
3 CBRS Install
4 Speed Test
5 Physically mount the antenna
6 Data Entry (Some data retained)
7 Network Scan
8 CBRS Install
9 Speed Test
10 Finish Installation (Capturing QR Code)
11 QR Code Screen
12 Finish Installation
Data entry screen
1 Verify that the Smart Antenna Tool’s battery charge level is above 20%.
2 Verify that the compass calibration is good.
3 Enter the following details:
a Customer BAN (from WFE)
b Cell Sector IDs (from WFE)
c Band Selection (Band 30 or Band 48)
d Call Sign (Optional)
e User ID (Required)
f Interference Grouping ID (Optional)