User's Manual

16
Outdoor Wireless Antenna (NRB-51)
www.netcommwireless.com
UM-00017 rev 1.0
Admin Shell Session Using SSH
The admin shell can be accessed using the admin VLAN (i.e. VLAN 4001). Through this admin interface, ssh session can be setup
and like the adb session, any admin activities can be performed,
For more details about the command list or details, please contact NetComm Wireless.
Using SSH over Ethernet
An SSH client is required for Ethernet access.
Note: To use this method, a PC must be directly connected to the OWA’s Ethernet interface, that is, it must not be
connected via another router/gateway.
Follow these steps to gain admin shell access:
1. Connect a PC to the NRB-51 using the Ethernet cable (see Installation instructions) and create a VLAN 4001 on the PC.
2. Get an IP address for the PC’s 4001 VLAN interface using DHCP.
3. Open a terminal emulator such as PuTTY and SSH to 192.168.11.1.
4. Log in to the NRB-51 using username
root
and password
admin
.