User's Manual

4
Outdoor Wireless Antenna (NRB-51)
www.netcommwireless.com
UM-00017 rev 1.0
Overview
Introduction
This document provides you the information you need to set up, configure and use the NetComm Wireless NRB-51 Outdoor
Wireless Antenna, also referred to as OWA (Dundee) in the document.
Target audience
This document is intended for system integrators or experienced hardware installers who understand telecommunications
terminology and concepts.
Prerequisites
Before continuing with the installation of NRB-51, please confirm that you have the following:
A laptop with a working Ethernet network adapter and web browser.
Adjustable wrench, a nutdriver set, screwdrivers and appropriate screws for mounting the outdoor unit.
Ethernet cable long enough to reach from the Outdoor unit mount location to the indoor unit (POE-02) mount location,
RJ45 heads and a crimping tool
Shorter Ethernet cable long enough to reach from the indoor unit (POE-02) to the Arris RG.
A device with WiFi client to access the installation alignment tool’s web browser
Notation
The following symbols are used in this user guide:
The following note requires attention.
The following note provides a warning.
The following note provides useful information.