User's Manual

8
Outdoor Wireless Antenna (NRB-51)
www.netcommwireless.com
UM-00017 rev 1.0
Installing the Outdoor Unit
The image below illustrates a typical installation of the WNTD Outdoor Unit.
Determining the best location for the Outdoor unit
Determining the best location for the Outdoor Wireless Antenna (OWA) involves:
1. Performing a survey of the site using the RF alignment tool and
2. Consulting the customer about positioning based on results of the RF test, aesthetics and any planned renovations to the
property that may affect the mounting location.
When selecting a location to mount the OWA, ensure that:
lock of the desired cell and optimal signal level is achieved.
the mounting position is unobtrusive and aesthetically pleasing where possible.
the mount/antenna is not closer than 1 meter from other antenna equipment.
strata or heritage properties have obtained approval for the installation. This is the sole responsibility of the customer.
the OWA is mounted only in locations which adhere to the following property diagram:
Where possible, avoid mounting the OWA so that it is aimed back over the roof of the property.