User's Manual

www.netcommwireless.com
NetComm Wireless 4G M2M Router
11
v1.0
Ethernet port LED indicators
Each of the Ethernet ports of the NTC-140-01 router have two LED indicators on them.
Figure 3 - Ethernet port LED indicators
The table below describes the statuses of each light and their meanings.
LED
STATUS
DESCRIPTION
Green
On
There is a valid network link.
Blinking
There is activity on the network link.
Off
No valid network link detected.
Amber
On
The Ethernet port is operating at a speed of 1000Mbps.
Off
The Ethernet port is operating at a speed of 10/100Mbps or no Ethernet cable is connected.
Table 5 - Ethernet port LED indicators description
Do not connect or disconnect cables or devices to or from the Ethernet ports in hazardous locations such as those in
which flammable gases or vapors may be present, but normally are confined within closed systems; are prevented from
accumulating by adequate ventilation; or the location is adjacent to a location from which ignitable concentrations might
occasionally be communicated.