User's Manual

12
NetComm Wireless 4G M2M Router
www.netcommwireless.com
v1.0
Interfaces
Figure 4 - Interfaces
NO.
ITEM
DESCRIPTION
1
Cellular Main antenna connector
SMA connector for main cellular antenna.
2
Cellular AUX antenna connector
SMA connector for auxiliary cellular antenna.
3
microSD™ card slot
Insert a microSD™ card here to provide additional storage (Optional).
4
SIM card slot
Insert SIM card here.
5
SIM tray eject button
Press to eject the SIM tray
6
Micro USB 2.0 OTG port
Provides connectivity for optional external storage or a USB Ethernet dongle. Supplies up to 0.5A to
connected device.
7
Reset button
Press and hold for less than 5 seconds to reboot to normal mode. The LEDs are green and extinguish in
sequence to indicate that the router will reboot normally if the button is released during this period.
Press and hold for 5 to 15 seconds to reboot to recovery mode. The LEDs are amber and extinguish in
sequence to indicate that the router will reboot to recovery mode if the button is released during this
period.
Press and hold for 15 to 20 seconds to reset the router to factory default settings. The LEDs are red and
extinguish in sequence to indicate that the router will reset to factory default settings if the button is
released during this period.
8
Molex Mini-Fit™ Jr. 2 x 2 receptacle
Connect the provided power supply here. The Molex receptacle provides:
Ground (−)
Power (+)
I/O terminal
(i) ignition input detection terminal.
9
LAN port
LAN port for wired Ethernet clients.
10
LAN/WAN port
LAN or WAN port for wired Ethernet clients or to bridge another network connection.
Table 6 – Interfaces
6
7
8
9
10
3
4
5
1
2