Manualshelf

User's Manual

ManualsBrandsNetComm Wireless ManualsElectronicsNTC-140-01
11121314151617181920
16
NetComm Wireless 4G M2M Router
www.netcommwireless.com
Via vertical DIN rail mounting bracket and metal bracket
Put four screws through the vertical DIN rail mounting bracket and line them up with the four holes on the metal bracket. Tighten
them to affix the vertical DIN rail bracket to the metal bracket. The NTC-140-01 router may then be snapped into the vertical DIN rail
bracket.
Via horizontal DIN rail mounting bracket
Attach the horizontal DIN rail mounting bracket to the DIN rail by either snapping it onto the rail using the bend line and the tab at
the top or sliding it on to the rail from the end. Optionally, you may put a screw through the centre hole of the bracket so that it
doesn’t move along the DIN rail.