Manualshelf

User's Manual

ManualsBrandsNetComm Wireless ManualsElectronicsNTC-140-01
21222324252627282930
www.netcommwireless.com
NetComm Wireless 4G M2M Router
27
v1.0
Connect on demand
The Connect on demand feature keeps the Packet Data Protocol (PDP) context deactivated by default while making it appear to
locally connected devices that the router has a permanent connection to the mobile broadband network. When a packet of interest
arrives or an SMS wake-up command is received, the router attempts to establish a mobile broadband data connection. When the
data connection is established, the router monitors traffic and terminates the link when it is idle.
Note: When interesting packets arrive, the recovery time for the wireless WAN connection is approximately 20-30 seconds.
Configuring Connect on demand
To configure Connect on demand:
1.
Click the Networking menu item from the top menu bar.
2.
On the Connect on demand page, click the Connect on demand toggle key so that it is ON. Extra options appear. See the
following sub-sections for further instructions.
Figure 18 - Connect on demand configuration options