User's Manual

www.netcommwireless.com
NetComm Wireless 4G M2M Router
9
v1.0
LED indicators
The NTC-140-01 router uses 8 LEDs to display the current system and connection status.
Figure 2 - NTC-140-01 router LED Indicators
LED ICON
NAME
COLOUR
STATE
DESCRIPTION
Power
Off
Power off
Double flash
Powering up
On
Power on
On
Power on in recovery mode
Slow flashing
Hardware error, such as SIM not inserted
Network
Off
Radio Off
On
Connected via WWAN
Blinking
1
Traffic via WWAN
Slow flashing
Connecting PDP
On
Registered network
Slow flashing
Registering network
Slow flashing
SIM PIN locked
Fast flashing
SIM PUK locked
On
Can’t connect
Signal
strength
On
LTE signal
On
WCDMA signal
On
GSM signal
Table 3 - LED Indicators
1
The term “blinking” means that the LED may pulse, with the intervals that the LED is on and off not being equal. The term “flashing” means that the
LED turns on and off at equal intervals.