User's Manual

UM-00003
www.netcommwireless.com
NTC-30WV – Outdoor HSPA+ WiFi Router with Voice
25
Band / Provider
The band settings page enables you to select which frequency band you will use for your connection and enables you to scan for
available network operators in your area.
Figure 22 - Band / Provider Selection
You may want to do this if you’re using the router in a country with multiple frequency networks that may not all support HSPA. You
can select the router to only connect on the network frequencies that suit your requirements.
Make your selection from the ‚Change Band:‛ drop down list.
The following band settings options are available:
WCDMA 900/2100
WCDMA ALL
GSM ALL
GSM 900/1800
All Bands
The default setting of ‚All bands‛ should be appropriate for the majority of users.
You can also scan for available 3G service providers in your area by selecting ‚Manual‛ for the ‚Current Operator Selection Mode‛
and then clicking the scan button.
Figure 23 - Manual Operator Selection
A list of the detected 3G service carriers in your area will be displayed. Select the most appropriate 3G service from the list shown
and click ‚Apply‛.
The default setting of ‚Automatic‛ should be appropriate for the majority of users and locations.