User's Manual

Placement of the router
When selecting a location to mount the CDMA M2M router, keep in mind that it houses two high performance internal antennas
designed to provide optimum signal strength in a wide range of environments. If you find the signal strength is weak, try moving
the router to a different place or mounting it differently. If signal strength doesn’t improve, you may need to attach an external
antenna (not included) to the router’s female SMA connector.
Note: If you connect an external antenna to the female SMA connector, the main internal antenna disables
automatically but the auxiliary internal antenna remains connected to provide (where possible) diversity assistance.
Note: When selecting a location for the router, allow at least 20 seconds for the signal strength LEDs to update before
trying a different location or connecting an external antenna.
Mounting options
The CDMA M2M router can be quickly and easily mounted in a variety of locations.
Mounted flat against the wall
When mounted flat against the wall, the CDMA M2M router has a slimline form factor. Use appropriately sized screws in the
mounting holes provided on the base of the unit.
Figure 4 - Wall mount - Flat against the wall
www.netcommwireless.com
NetComm Wireless CDMA M2M Router
11