User's Guide

Internet access

Connect other devices

You can simultaneously connect up to twenty (20) devices per Wi-Fi network (2.4

GHz and 5 GHz), forty (40) total, including smartphones, tablets, and laptops, to your

Wireless Home Internet device.

1. Open the Wi-Fi network manager on your Wi-Fi enabled device.

2. Find and select the Wi-Fi network name (SSID): XXX-XXXXXX or XXX-XXXXXX-

GUEST (guest network disabled by default).

NOTE: The Wireless Home Internet device supports both 2.4 GHz and 5 GHz Wi-Fi

networks. You can simultaneously connect up to twenty (20) Wi-Fi enabled devices

on each network.

3. When prompted, enter the Wi-Fi password found on the bottom of the Wireless

Home Internet device.

Connect via Ethernet

To connect via Ethernet, plug one end of your Ethernet cable in to the Ethernet port on

your computer and the other end in to the Ethernet port on the back of the Wireless

Home Internet device.

Changing Wi-Fi network name and password

You can customize your Wireless Home Internet device’s Wi-Fi network name (SSID) and

password using the Wireless Home Internet Manager. On any device that is connected to

the Wireless Home Internet device, enter the URL printed on the product label directly

into your browser address eld. Log in using “attadmin” (or your customized login). Go

to Wi-Fi > 2.4GHz > EDIT or Wi-Fi > 5GHz > EDIT to change your network name and

password.

NOTE: You will need to reconnect all Wi-Fi devices using the new information.