User's Guide

52
Active UPnP Redirects
Displays the active UPnP redirects on the Wireless Home Internet device.
UPnP Settings
• Start UPnP and NAT-PMP service: Starts or kills the UPnP and NAT-PMP service
to allow UPnP and NAT-PMP functionality.
• Enable UPnP functionality: Enables or disables the UPnP functionality on the
Wireless Home Internet. This service allows local client software to automatically
congure the device for trafc to pass through.
• Enable NAT-PMP functionality: Enables or disables the Wireless Home Internet to
automatically learn network address translation (NAT) settings and port forwarding
congurations.
• Enable secure mode: When enabled, this setting creates UPnP redirects only to
the requesting IP address.
• Port: The port used for the UPnP and NAT-PMP services.