Network Router User Manual

NB6, NB6W, NB6Plus4, NB6Plus4W, NB6Plus4Wn User Guide YML854Rev1

40 www.netcomm.com.au

Numbered IP over ATM (IPoA)

Description:

If you apply for multiple IP addresses from your ISP, you can assign these public IP addresses to the ADSL

Router and public server, e.g., Web or FTP server. Typically the ﬁrst IP is network address, the second is

used as router IP address and the last one is for subnet broadcasting. Other remaining IP addresses can be

assigned to PCs on the LAN. The following example uses the LAN IP address ranging from 10.11.80.81 to

10.11.80.86 and the subnet mask for LAN is 255.255.255.248. The WAN IP address is 10.11.95.233, and

the subnet mask for WAN is 255.255.255.248.

Conﬁguration:

1. Start your browser and type 192.168.1.1 in the URL box to access ADSL web-based manager.

2. Go to Quick Start – Quick Setup. Uncheck Auto Scan Internet Connection (PVC). Key in the VCI and VPI

value, e.g.:

• VPI – 8

• VCI – 35

Click the Next button.

3. On the Conﬁgure Internet Connection – Connection Type page, select IP over ATM (IPoA) then click Next.

4. On the WAN IP Settings page, select Use the following IP address and Use the following DNS Server

Address, then key in the information that your ISP offered, e.g.:

WAN IP Address: 10.11.95.233

WAN Subnet Mask: 255.255.255.248

Primary DNS server: 168.95.1.1

Secondary DNS server: 168.95.192.1

Uncheck Enable NAT and click Next.

5. On the Conﬁgure LAN side Settings page, key in the information for your LAN, e.g.,

Primary IP Address: 192.168.1.1

Subnet mask: 255.255.255.0

Start IP Address: 192.168.1.2

End IP Address: 192.168.1.254

6. Check Conﬁgure the second IP Address and Subnet Mask for LAN Interface and enter the

information needed.

Secondary IP Address: 10.11.80.81

Subnet mask: 255.255.255.248

Click Next.

7. Check the network information on the Summary page. Make sure the settings match the settings

provided by your ISP. Click Finish.

8. Refer to the TCP/IP properties, specify an IP Address, and ﬁll in other information needed, e.g.:

IP Address: 10.11.80.82

Subnet Mask: 255.255.255.248

Gateway: 10.11.80.81

Preferred DNS server: 168.95.1.1

9. Now the router is correctly conﬁgured. You can access the Internet.