User Manual and Operating Guide

22 V200 VoIP Telephone Adaptor/Router

YML796 Rev1

D. Save your settings and Reboot the V200

Save your setting by clicking on the Save button under the System section

After you save the settings, click the Reboot button to reboot the V200. You have completed

the basic conﬁguration of your V200.

You have now completed the basic installation and conﬁguration of your new NetComm

V200. At this point you will be able to make VoIP calls to and from your V200 connection.

You may consider contacting your VoIP service provider’s customer support line to test your

VoIP service and enable any available supplementary call features.

Note: For more information on the advanced features of your V200, please

refer to the User Guide on the V200 CD ROM.