User's Manual

Reference Manual for the NETGEAR ProSafe VPN Client
Troubleshooting 9-11
202-10015-01
– For minimal security, MD5
– For maximum security, SHA-1 (the default)
– DES-MAC
Record your selection; you need it to determine the length of the key for the ESP
Authentication Key box when entering inbound and outbound keys.
c. In the Encapsulation box, accept Tunnel (the default) or click Transport.
Note: If you selected the Connect using check box and a gateway when you configured
All Connections or a specific connection to be secured, Tunnel is the only option.
• To ensure that the data has not been altered, select the Authentication Protocol (AH)
check box.
a. In the Hash Algorithm box, click an option:
– MD5 for minimal security
– SHA-1 for maximum security (the default)
Record your selection; you need it to determine the length of the key for the AH
Authentication Key box when entering inbound and outbound keys.
b. In the Encapsulation box, accept Tunnel (the default) or click Transport.
Note: If you selected the Connect using check box and a gateway when you configured
All Connections or a specific connection to be secured, Tunnel is the only option.
– Make sure that the remote party configures the same options in its VPN software.
9. Enter inbound and outbound manual keys.
10. Click Save.
Enter Inbound and Outbound Manual Keys
Before you perform this task, make sure that the particular connection is Enabled for manual keys.
1. In the Security Policy Editor, in the Network Security Policy list, expand the secure
connection .
2. Expand Security Policy.
3. Expand Key Exchange (Phase 2).
4. Click the proposal to enter manuals keys for.