User's Manual

Reference Manual for the NETGEAR ProSafe VPN Client
C-8 NETGEAR ProSafe VPN Client to NETGEAR FVS318 or FVM318 VPN Routers
202-10015-01
c.
Enter 255.255.255.0 in the Mask field as the LAN Subnet Mask of the FVS318
d. Assure that the following settings are configured:
– In the Connection Security box, Secure is selected
– In the ID Type menu, IP Subnet is selected
– In the Protocol menu, All is selected
– The Connect using Secure Gateway Tunnel checkbox is checked
e. In the ID Type menus, select Domain Name and Gateway Hostname. Enter the public
FQDN of the FVS318 in the field directly below the ID Type menu. In this example,
FVSrouter.dyndns.org would be used for both the Domain Name and Gateway
Hostname.
3. Configure the Connection Identity Settings.
a. In the Network Security Policy list, click the My Identity subheading.
Figure C-7: Connection Identity
b.
Click Pre-Shared Key.
Figure C-8: Connection Identity Pre-Shared Key
In this example, enter this
pre-shared key in this field:
hr5xb84l6aa9r6