User's Manual

Reference Manual for the NETGEAR ProSafe VPN Client
NETGEAR ProSafe VPN Client to NETGEAR FVS318 or FVM318 VPN Routers C-9
202-10015-01
c.
Enter the same Pre-Shared Key used in the FVS318 VPN router.
In this example, we used hr5xb84l6aa9r6.
d. Click OK.
4. Configure the Security Policy Settings.
a. In the Network Security Policy list, click the Security Policy subheading.
Figure C-9: Security Policy
b.
For this example, assure that the following settings are configured:
– In the Select Phase 1 Negotiation Mode menu, select Main Mode.
– Check the Enable Perfect Forward Secrecy (PFS) checkbox.
– In the PFS Key Group drop-down list, Diffie-Hellman Group 2.
– Check the Enable Replay Detection checkbox.
c. Configure the Connection Security Policy
In this step, you will provide the authentication (IKE Phase 1) settings, and the key
exchange (Phase 2) settings. The setting choices in this procedure follow the VPNC
guidelines.