User's Manual

Reference Manual for the NETGEAR ProSafe VPN Client
NETGEAR VPN Client to NETGEAR FVL328 or FWAG114 VPN Router D-3
202-10015-01
Figure D-2: NETGEAR FVL328 IKE Policy Configuration
– Enter a descriptive name for the policy in the Policy Name field. This name is not supplied
to the remote VPN Endpoint. It is used to help you manage the IKE policies. In our
example, we used VPNclient as the Policy Name.
– From the Direction/Type drop-down box, select Remote Access
– From the Exchange Mode drop-down box, select Aggressive Mode. This will also be
selected in the NETGEAR ProSafe VPN Client My Identity ID Type fields, as seen in
“Security Policy“ on page D-11.
– From the Local Identity drop-down box, select Fully Qualified Domain Name (the actual
WAN IP address of the FVL328 will also be used in the Connection ID Type fields of the
NETGEAR ProSafe VPN Client as seen in “Security Policy Editor New Connection“ on
page D-9).
– For this example we typed FVL328 in the Local Identity Data field.
– From the Remote Identity drop-down box, select Fully Qualified Domain Name.
–Type VPNclient in the Remote Identity Data. This will also be entered in the NETGEAR
ProSafe VPN Client My Identity ID Type fields, as seen in “My Identity“ on page D-10.