User's Manual

Reference Manual for the Broadband Mobile Router MBR814
3-4 Connecting the Router to the Internet
202-10005-05, June 2005
Connecting the MBR814 to Your LAN
This section provides instructions for connecting the MBR814 router.
Note: The Resource CD included with your router contains an animated Installation Assistant to
help you through this procedure.
There are three steps to connecting your router:
1. Install the router.
2. Log in to the router.
3. Connect to the Internet.
Note: Follow the steps below to connect your router to your network. Before you begin, locate the
configuration information from your Internet Service Provider (ISP).
First, install the router.
1. Turn off your computer.
2. Check the router to make sure that the broadband card is securely inserted in the slot in the
back of the router. Please refer to the applicable sections in the appendix or the user manual
provided with the broadband card for additional installation information.
3. Connect the Ethernet cable that came with your router into a LAN port on the router such as
LAN port 4, and then connect the other end into the Ethernet port of your computer.
Figure 3-1: Connect the router to your computer