User's Manual

Reference Manual for the Broadband Mobile Router MBR814
Connecting the Router to the Internet 3-5
202-10005-05, June 2005
4. Plug in the power adapter to your router. Verify the following:
• The power light is lit after applying power to the router.
• The Status light comes on briefly and then goes off.
Note: If applicable, the status light on the broadband card shows that it is active. Please
refer to the broadband card user manual for details.
Next, log in to the router.
Note: Your computer needs to be configured for DHCP. For instructions on configuring for DHCP,
please see Appendix C, “Preparing Your Network”.
1. Turn on your computer, let the operating system boot up completely, and log in as needed.
2. The light on the router for the port connected to the computer lights up.
3. From the Ethernet connected computer you just set up, open a browser such as Internet
Explorer or Netscape® Navigator.
4. Connect to the router by typing http://192.168.0.1 in the address field of your browser.
A login window opens as shown below:
Figure 3-2: Login window
a. Enter admin for the user name and password for the password, both in lower case letters.
After logging in you will see the Basic Setup menu.