User's Manual

Reference Manual for the Mobile Broadband Router MBR814
Wireless Configuration 4-5
Note: This value is case sensitive. For example, Wireless is not the same as wireless.
— Region. The region can not be changed by users
— Mode. The default is "g & b", which allows both "g" and "b" wireless stations to access
this device. “g only” allows only 802.11g wireless stations to be used. “b only” allows
802.11b wireless stations; 802.11g wireless stations can still be used if they can operate in
802.11b mode.
• Wireless Access Point.
— Enable Wireless Access Point. This field lets you turn off or turn on the wireless access
point built in to the router. The wireless icon on the front of the router will also display the
current status of the Wireless Access Point to let you know if it is disabled or enabled. The
wireless access point must be enabled to allow wireless stations to access the Internet.
— Allow Broadcast of Name (SSID). If enabled, the SSID is broadcast to all Wireless
Stations. Stations which have no SSID (or a "null" value) can then adopt the correct SSID
for connections to this Access Point.
— Wireless Isolation. If enabled, Wireless Stations will not be able to communicate with
each other or with Stations on the wired network. This feature should normally be
disabled.
• Wireless Station Access List.
— By default, any wireless computer that is configured with the correct wireless network
name or SSID will be allowed access to your wireless network. For increased security, you
can restrict access to the wireless network to only specific computers based on their MAC
addresses. Click Setup Access List to display the Wireless Station Access List menu.