User's Manual

Table Of Contents
Reference Manual for the 54 Mbps Wall-Plugged Router WGX102
C-12 Preparing Your Network
July 2004 202-10036-01
DHCP Configuration of TCP/IP in Windows 2000
Once again, after you have installed the network card, TCP/IP for Windows 2000 is configured.
TCP/IP should be added by default and set to DHCP without your having to configure it.
However, if there are problems, follow these steps to configure TCP/IP with DHCP for Windows
2000.
Verify that the Obtain an IP address
automatically radio button is selected.
Verify that Obtain DNS server address
automatically radio button is selected.
Click the OK button.
This completes the DHCP configuration of TCP/
IP in Windows XP.
Repeat these steps for each PC with this version
of Windows on your network.