User Manual
Table Of Contents
- RangeMax NEXT Wireless Router WNR834A Reference Manual
- Contents
- Chapter 1 About This Manual
- Chapter 2 Introduction
- Chapter 3 Connecting the Router to the Internet
- Prepare to Install Your Wireless Router
- First, Use the Smart Wizard to Configure the Wireless Router
- Now, Set Up a Computer for Wireless Connectivity
- Troubleshooting Tips
- How to Manually Configure Your Internet Connection
- Using the Smart Setup Wizard
- NETGEAR Product Registration, Support, and Documentation
- Chapter 4 Wireless Configuration
- Chapter 5 Content Filtering
- Chapter 6 Maintenance
- Chapter 7 Advanced Configuration of the Router
- Configuring Advanced Wireless Settings
- Configuring Port Triggering and Port Forwarding
- Configuring Port Forwarding to Local Servers
- Configuring the WAN Setup Options
- Using the LAN IP Setup Options
- Using a Dynamic DNS Service
- Configuring Static Routes
- Enabling Remote Management Access
- Using Universal Plug and Play (UPnP)
- Chapter 8 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Related Documents
RangeMax NEXT Wireless Router WNR834A Reference Manual
Wireless Configuration 4-11
v1.0, April 2006
How to Configure WEP
To configure WEP data encryption, follow these steps:
1. Log in to the WNR834A firewall at its default LAN address of http://www.routerlogin.net
with its default user name of admin and default password of password, or using whatever
LAN address and password you have set up.
2. Click Wireless Settings in the main menu of the WNR834A firewall.
3. From the Security Options menu, select WEP. The WEP options display.
Note: If you use a wireless computer to configure WEP settings, you will be disconnected
when you click Apply. You must then either configure your wireless adapter to
match the wireless router WEP settings or access the wireless router from a wired
computer to make any further changes.