User Manual
Table Of Contents
- RangeMax NEXT Wireless Router WNR834A Reference Manual
- Contents
- Chapter 1 About This Manual
- Chapter 2 Introduction
- Chapter 3 Connecting the Router to the Internet
- Prepare to Install Your Wireless Router
- First, Use the Smart Wizard to Configure the Wireless Router
- Now, Set Up a Computer for Wireless Connectivity
- Troubleshooting Tips
- How to Manually Configure Your Internet Connection
- Using the Smart Setup Wizard
- NETGEAR Product Registration, Support, and Documentation
- Chapter 4 Wireless Configuration
- Chapter 5 Content Filtering
- Chapter 6 Maintenance
- Chapter 7 Advanced Configuration of the Router
- Configuring Advanced Wireless Settings
- Configuring Port Triggering and Port Forwarding
- Configuring Port Forwarding to Local Servers
- Configuring the WAN Setup Options
- Using the LAN IP Setup Options
- Using a Dynamic DNS Service
- Configuring Static Routes
- Enabling Remote Management Access
- Using Universal Plug and Play (UPnP)
- Chapter 8 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Related Documents
RangeMax NEXT Wireless Router WNR834A Reference Manual
4-12 Wireless Configuration
v1.0, April 2006
4. Select the Authentication Type and Encryptions strength from the drop-down lists.
5. You can manually or automatically program the four data encryption keys. These values must
be identical on all computers and Access Points in your network.
• Automatic—Enter a word or group of printable characters in the Passphrase box and click
the Generate button. The passphrase is case sensitive; NETGEAR is not the same as
nETgear. The four key boxes is automatically populated with key values.
• Manual—Enter ten hexadecimal digits (any combination of 0-9, a-f, or A-F). These
entries are not case sensitive; AA is the same as aa.
Select which of the four keys to activate.
Figure 4-5