User Manual
Table Of Contents
- RangeMax NEXT Wireless Router WNR834A Reference Manual
- Contents
- Chapter 1 About This Manual
- Chapter 2 Introduction
- Chapter 3 Connecting the Router to the Internet
- Prepare to Install Your Wireless Router
- First, Use the Smart Wizard to Configure the Wireless Router
- Now, Set Up a Computer for Wireless Connectivity
- Troubleshooting Tips
- How to Manually Configure Your Internet Connection
- Using the Smart Setup Wizard
- NETGEAR Product Registration, Support, and Documentation
- Chapter 4 Wireless Configuration
- Chapter 5 Content Filtering
- Chapter 6 Maintenance
- Chapter 7 Advanced Configuration of the Router
- Configuring Advanced Wireless Settings
- Configuring Port Triggering and Port Forwarding
- Configuring Port Forwarding to Local Servers
- Configuring the WAN Setup Options
- Using the LAN IP Setup Options
- Using a Dynamic DNS Service
- Configuring Static Routes
- Enabling Remote Management Access
- Using Universal Plug and Play (UPnP)
- Chapter 8 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Related Documents
RangeMax NEXT Wireless Router WNR834A Reference Manual
Wireless Configuration 4-13
v1.0, April 2006
See “Wireless Communications” in Appendix B for a full explanation of each of these options,
as defined by the IEEE 802.11 wireless communication standard.
6. Click Apply to save your settings.
How to Configure WPA-PSK or WPA2-PSK Wireless Security
To configure WPA-PSK or WPA2-PSK, follow these steps:
Note: Not all wireless adapters support WPA. Furthermore, client software is also
required. Windows XP with Service Pack 2 does include WPA support.
Nevertheless, the wireless adapter hardware and driver must also support WPA.
For instructions on configuring wireless computers or PDAs (Personal Digital
Assistants) for WPA-PSK security, consult the documentation for the product you
are using.