User Manual
Table Of Contents
- RangeMax NEXT Wireless Router WNR834A Reference Manual
- Contents
- Chapter 1 About This Manual
- Chapter 2 Introduction
- Chapter 3 Connecting the Router to the Internet
- Prepare to Install Your Wireless Router
- First, Use the Smart Wizard to Configure the Wireless Router
- Now, Set Up a Computer for Wireless Connectivity
- Troubleshooting Tips
- How to Manually Configure Your Internet Connection
- Using the Smart Setup Wizard
- NETGEAR Product Registration, Support, and Documentation
- Chapter 4 Wireless Configuration
- Chapter 5 Content Filtering
- Chapter 6 Maintenance
- Chapter 7 Advanced Configuration of the Router
- Configuring Advanced Wireless Settings
- Configuring Port Triggering and Port Forwarding
- Configuring Port Forwarding to Local Servers
- Configuring the WAN Setup Options
- Using the LAN IP Setup Options
- Using a Dynamic DNS Service
- Configuring Static Routes
- Enabling Remote Management Access
- Using Universal Plug and Play (UPnP)
- Chapter 8 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Related Documents
RangeMax NEXT Wireless Router WNR834A Reference Manual
4-14 Wireless Configuration
v1.0, April 2006
1. Click Wireless Settings in the Setup section of the main menu and select one of the WPA-
PSK or WPA2-PSK options for the Security Type. The third option (WPA-PSK [TKIP] +
WP2-PSK [AES]) is the most flexible, since it allows clients using either WPA-PSK or
WPA2-PSK.
2. Enter a word or group of 8-63 printable characters in the Passphrase box.
3. Click Apply to save your settings.
Figure 4-6