User Manual
Table Of Contents
- Contents
- Chapter 1 Introduction
- Chapter 3 Basic Setup
- Chapter 4 Configuration
- Appendix A Technical Specifications
NETGEAR RangeMax Next Wireless PC Card WN511T User Manual
Configuration 4-5
March 2006
c. The Settings tab displays as shown below.
Figure 4-3: Smart Wizard Wireless Assistant Settings tab page
d. Select Computer-to-Computer (Ad hoc) for the Network Type.
e. Enter the SSID for the Ad-Hoc network.
f. Click Apply.
2. Save your settings in a Profile.
a. Type a descriptive name in the “Profiles” field.
b. Click Save Profile. All the configuration settings are saved in this profile.
c. Click Apply.
d. Click Close to exit the configuration utility.
3. Configure the PC network settings.
a. Configure each PC with either a static IP address or with the IPX protocol.
Note: For instructions on configuring static IP addresses, refer to the networking tutorial
on your Resource CD.
b. Restart the PCs.
4. Verify wireless connectivity between your peer devices.