User Manual
Table Of Contents
- About This Manual
- Conventions, Formats, and Scope
- How to Print This Manual
- Chapter 1 Basic Setup
- Chapter 2 Network Connections and Wireless Security
- Understanding the WN311B Smart Wizard
- Finding a Network
- Profiles
- Setting up a Profile to Connect to an Access Point or Router
- Setting up a Computer-to-Computer (Ad Hoc) Profile
- Wireless Security
- Using Wireless Security Features
- Wireless Network Name (SSID) and Security Settings
- Setting up WEP Encryption Security
- Setting up WPA2-PSK Security
- Setting up WPA-PSK Security
- Networks Page
- Statistics Page
- About Page
- Chapter 3 Troubleshooting
- Appendix A Default Settings and Technical Specifications
- Appendix B Related Documents
NETGEAR RangeMax™ NEXT Wireless PCI Adapter WN311B User Manual
1-4 Basic Setup
v1.0, May 2006
Installation
1. First, install the WN311B software.
e. When prompted, select the country where you are located, and then click Agree.
2. Now, insert the wireless PCI adapter.
Insert the NETGEAR CD. If the CD main
page does not appear, double click
Autorun.exe on the CD.
a. Click Install Software.The Check for
Updates window opens.
b. If you are connected to the Internet,
click Check for Updates. If not, you can
choose to install from the CD.
c. When the Installation Complete
message appears, click Next.
d. On the Smart Wizard screen, click Next
to proceed with the Smart Wizard setup.
Figure 1-1
a. When prompted, shut down the
computer.
b. Unplug the computer, open the case,
and install the WN311B into a PCI slot.
c. Connect the antenna to the adapter and
position the antenna to the up position.
d. Close the case, plug the power cord
back in, and restart your computer.
Figure 1-2