User's Manual
Table Of Contents
- DG834N RangeMaxTM NEXT Wireless ADSL2+ Modem Router Reference Manual
- Contents
- About This Manual
- Chapter 1 Introduction
- Chapter 2 Wireless Configuration
- Chapter 3 Protecting Your Network
- Chapter 4 Managing Your Network
- Chapter 5 Advanced Configuration
- Chapter 6 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Related Documents
DG834N RangeMax
TM
NEXT Wireless ADSL2+ Modem Router Reference Manual
Advanced Configuration 5-11
v1.0, May 2005
a. Click the Add button to open the Edit Menu, shown in Figure 5-6.
b. Type a route name for this static route in the Route Name box under the table. This is for
identification purpose only.
c. Select Private if you want to limit access to the LAN only. The static route will not be
reported in RIP.
d. Select Active to make this route effective.
e. Type the Destination IP Address of the final destination.
f. Type the IP Subnet Mask for this destination. If the destination is a single host, type
255.255.255.255.
g. Type the Gateway IP Address, which must be a router on the same LAN segment as the
router.
h. Type a number between 2 and 15 as the Metric value. This represents the number of
routers between your network and the destination. Usually, a setting of 2 or 3 works.
Figure 5-6