User Manual
Table Of Contents
- Chapter 1 About This Manual
- Chapter 2 Introduction
- Chapter 3 Connecting the Router to the Internet
- Chapter 4 Wireless Configuration
- Chapter 5 Protecting Your Network
- Chapter 6 Managing Your Network
- Chapter 7 Advanced Configuration
- Chapter 8 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Related Documents
Reference Manual for the Mobile Broadband Router MBR814X
6-5
v1.0, January 2006
Table 6-1. Router Status Fields
Field Description
Firmware Version This field displays the router firmware version.
Broadband These parameters apply to a wireless broadband PC card.
Modem SW Version Software version used in the broadband PC card.
IMEI International Mobile Equipment Identity number assigned to the
Broadband PC card.
IMSI International Mobile Subscriber Identity number assigned to the SIM card in the
Broadband PC card, if installed.
Operator Network ISP information.
Frequency The frequency currently in use for the wireless connection.
Cell ID The identification number of the cell that the wireless module is currently
connected to.
Self Test The result of the power-on self test.
WAN Port These parameters apply to the Internet port of the router.
Connection Status The connection status of the Internet port.
IP Address The IP address. If no address is shown, the router cannot connect to the
Internet.
DHCP If None, the router uses a fixed IP address on the broadband.
If Client, the router gets an IP address dynamically from the ISP.
IP Subnet Mask The IP Subnet Mask .
Gateway IP Address The gateway IP address used by the Internet port.
Domain Name
Server (DNS)
The DNS Server IP addresses. These addresses are usually obtained
dynamically from the ISP.
LAN Port These parameters apply to the Local (LAN) port of the router.
MAC Address The Ethernet MAC address.
IP Address The defualt IP address is 192.168.0.1.
DHCP If OFF, the router will not assign IP addresses to PCs on the LAN.
If ON, the router will assign IP addresses to PCs on the LAN.
IP Subnet Mask The default IP Subnet Mask is 255.255.255.0.
Wireless Port These parameters apply to the router’s wireless connection.
Name (SSID) Name of the wireless local area network (WLAN).
Region The country in which the wireless port is configured to operate.
Channel Current channel in use.
Wireless AP Indicates if the wireless access point feature is enabled.
Broadcast Name Indcates if the MBR814X us broadcasting its SSID.