User's Manual

108 Mbps Wireless Router WGT624 v4 Reference Manual
2-8 Wireless Settings and Security
v1.0, May 2007
WEP Wireless Security
When you are setting up wireless security, these guidelines will help make the process simpler and
easier:
• Use an Ethernet cable to connect your computer to the router when you are setting up or
changing wireless settings. If you are connected wirelessly and you set up the wireless
security, you will lose your wireless connection when you apply the change.
• Remember to note what your wireless settings are. For help keeping track of them, see
“Information to Gather Before Changing the Wireless Settings” on page 2-3.
Setting Up WEP
To set up Wired Encryption Protocol (WEP) wireless security:
1. Log in to the WGT624 v4 wireless router at its default LAN address of
http://192.168.1.1 with
its default user name of admin and default password of password, or using whatever LAN
address and password you have set up.
2. Click the Wireless Settings link in the Setup section of the main menu.
Note: Before setting up wireless security, verify that your wireless connections are set up
and working. See
“Setting Up Your Wireless Connections” on page 2-2.
Note: For instructions for configuring wireless computers or personal digital assistants
(PDAs) for WEP, see the documentation for the product you are using.