User's Manual
Table Of Contents
- 108 Mbps Wireless Router WGT624 v4 Reference Manual
- Contents
- About This Manual
- Chapter 1 Connecting the Router to the Internet
- Chapter 2 Wireless Settings and Security
- Chapter 3 Content Filtering
- Chapter 4 Maintenance
- Chapter 5 Advanced Configuration
- Chapter 6 Troubleshooting
- Appendix A Technical Specifications and Default Configuration
- Appendix B Related Documents
- Index
108 Mbps Wireless Router WGT624 v4 Reference Manual
Wireless Settings and Security 2-9
v1.0, May 2007
3. In the Security Options section, select WEP. The WEP options display.
4. Select the Authentication Type.
The default setting is Automatic, which usually works. If it does not, select Open System or
Shared Key. Check your wireless card’s documentation to see which method to use.
5. From the Security Encryption drop-down list, select the WEP encryption strength.
Figure 2-3
Note: 64-bit WEP encryption strength is sometimes referred to as 40-bit encryption.