User's Manual

108 Mbps Wireless Router WGT624 v4 Reference Manual
2-12 Wireless Settings and Security
v1.0, May 2007
Setting Up WPA-PSK or WPA2-PSK
To set up WPA-PSK or WPA2-PSK wireless security for the WGT624 v4 wireless router:
1. Click Wireless Settings in the Setup section of the main menu.
2. Select the security option that you want to use:
• WPA-PSK [TKIP]. Only computers or devices that use WPA-PSK [TKIP] will be able to
connect to the router. WPA2-PSK [AES] devices cannot connect.
• WPA2-PSK [AES]. Only computers or devices that use WPA2-PSK [AES] will be able to
connect to the router.WPA-PSK [TKIP] devices cannot connect.
• WPA-PSK [TKIP] + WPA2-PSK [AES]. This option is recommended, since it is
compatible with a greater number of computers and devices.
3. Enter a word or group of 8-63 printable characters in the Passphrase box.
4. Click Apply to save your settings.
Figure 2-5
Tip: If you were connected wirelessly to the router, you lost the wireless connection
when you clicked Apply. Now you must change the wireless security settings
for your computer to match the router settings. Then you will be able to connect
to the router.