User's Manual
Table Of Contents
- 108 Mbps Wireless Router WGT624 v4 Reference Manual
- Contents
- About This Manual
- Chapter 1 Connecting the Router to the Internet
- Chapter 2 Wireless Settings and Security
- Chapter 3 Content Filtering
- Chapter 4 Maintenance
- Chapter 5 Advanced Configuration
- Chapter 6 Troubleshooting
- Appendix A Technical Specifications and Default Configuration
- Appendix B Related Documents
- Index
108 Mbps Wireless Router WGT624 v4 Reference Manual
Technical Specifications and Default Configuration A-3
v1.0, May 2007
Default Configuration Settings
You can use the reset button located on the back of your WGT624 v4 wireless router to reset all
settings to their factory defaults. This is called a hard reset. To perform a hard reset, push and hold
the reset button for 3 seconds. Your wireless router will return to the factory configuration settings
shown in the table below.
Table A-1. Default Configuration Settings
Feature Default Behavior
Smart Wizard Disabled
Router Login
Router Login URL http://www. routerlogin.net or http://www.routerlogin.com
Login Name (case sensitive) admin
Login Password (case sensitive) password
Internet Connection
WAN MAC Address Use default hardware address
MTU Size 1500
Local Network
Router LAN IP address (aka Gateway IP
address)
192.168.1.1
Router Subnet 255.255.255.0
DHCP Server Enabled
Time Zone GMT
Time Zone Adjusted for Daylight Savings
Time
Disabled
Firewall
Inbound (communications coming in from
the Internet)
Disabled (bars all unsolicited requests except for traffic
on port 80, the http port)
Outbound (communications going out to
the Internet)
Enabled (all)