User's Manual
Table Of Contents
- Wireless Router Setup Manual
- Contents
- Getting to Know Your Wireless Router
- Installing Your Router Using the Smart Wizard
- Installing Your Router Manually (Advanced, Mac, and Linux Users)
- Troubleshooting
- Default Configuration
- Related Documents
- Registration and Certifications
Default Configuration 33
Default Configuration
Default Configuration Settings
You can use the reset button located on the back of your device to reset all configuration settings to
their factory defaults. This is called a hard reset.
• To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the
TEST LED blinks rapidly). Your device will return to the factory configuration settings shown
in Table 1 below.
• Pressing the reset button for a shorter period of time will simply cause your device to reboot.
Table 1. Home Router Default Configuration Settings
Feature Default Setting
Smart Wizard Enabled
Router Login
Router Login URL http://www. routerlogin.net; http://
www.routerlogin.com; or http://192.168.1.1
Login Name (case sensitive) admin
Login Password (case sensitive) password
Internet Connection
WAN MAC Address Default hardware address (on label)
MTU Size 1500
Local Network
Router Lan IP address (the Gateway IP
address)
192.168.1.1
IP Subnet Mask 255.255.255.0
DHCP Server Enabled
Time Zone GMT
Time Zone Adjusted for Daylight Saving
Time
Disabled