User Manual

NETGEAR Wireless-N Access Point WN802Tv2 Reference Manual
Wireless Security Settings 3-5
v1.0, June 2008
• Wireless Client Security Separation. If enabled, the associated wireless clients will not
be able to communicate with each other (this feature is intended for hotspots and other
public access situations). The default is No.
Note: If you are using a RADIUS server, configure the RADIUS settings first, as
described in the
“Configuring WPA with RADIUS” on page 3-9.
SSID and WEP/WPA Settings Setup Form
802.11b/bg/ng Configuration
For a new wireless network, print or copy this form and fill in the configuration parameters. For an
existing wireless network, the person who set up or is responsible for the network will be able to
provide this information. Be sure to set the Regulatory Domain correctly as the first step.
• SSID: The Service Set Identification (SSID) identifies the wireless local area network.
NETGEAR is the default WN802Tv2 SSID. However, you may customize it by using up to
32 alphanumeric characters. Write your customized SSID on the following line.
___________________________________
Note: The SSID in the wireless access point is the SSID you configure in the wireless adapter
card. All wireless nodes in the same network must be configured with the same SSID:
• Authentication:
Circle one: Open System or Shared Key (select Shared Key for more security).
Note: If you select shared key, the other devices in the network will not connect unless they
are set to Shared Key as well and have the same keys in the same positions as those in the
WN802Tv2.
• WEP Encryption Keys.
Circle one: 64, 128, or 152 bits. (Enter all four WEP encryption keys for the key size chosen.)
Key 1: ___________________________________
Key 2: ___________________________________
Key 3: ___________________________________
Key 4: ___________________________________
• WPA-PSK (Preshared Key)