User Manual

112 Maintenance and Troubleshooting
wireless security, see “Wireless Networking Basics” listed in
“Related Documents.”
Connecting to a Server
If the Digital Entertainer Elite cannot find the correct server, try the
following:
1. Verify that the Digital Entertainer Elite and the PC running the
Digital Entertainer for Windows software are on the same subnet.
For example, you could use a subnet with IP addresses in the range
of 192.168.0.x for both the Digital Entertainer Elite and the PC,
with a subnet mask of 255.255.255.0.
2. For Windows PCs, run the Configuration Wizard to verify that the
Digital Entertainer Elite and the computer can communicate. From
the Windows Start menu, select All Programs > NETGEAR Digital
Entertainer for Windows > Configuration Wizard.
3. For other systems, try rebuilding the server list. Press Home,
and select More > Supervisor functions > Advanced settings >
Serversa and shared folders > Build network shares list. If you do
not see the server, check your network connections and router
firewall settings, and try to ping the IP of the Digital Entertainer
Elite.
4. Try accessing the server from other Windows-based PCs. If these
PCs can see the server, the Digital Entertainer Elite will too.
Using Ping
To use ping:
1. From the Windows taskbar, click the Start button, and select Run.