User Manual

Welcome to the Digital Entertainer Elite 7
S/PDIF coaxial
(audio) port
Sony/Phillips Digital Interface (S/PDIF) cable, also called
standard RCA type coaxial cable (not included).
S-Video port S-Video cable (included) that works with most televisions
in the United States.
Component video
ports
Component video cable (not included).
Composite video
and stereo audio
port
Composite video and stereo audio cables (included),
which can be used with most televisions in the United
States.
S/PDIF optical
audio port
Sony/Phillips Digital Interface (S/PDIF) for optical cable
(not included).
USB v2.0 port USB mass storage devices such as hard drives, media
players (including Windows- or Mac-formatted Apple
iPods), and flash memory devices.
10/100 Mbps
Ethernet port with
LEDs
Cat 5 network cable (included in the package) that you
can use with this port to connect the Digital Entertainer
Elite to a wired local area network (LAN).
Reset button Reset the Digital Entertainer Elite to its default factory
settings. To reset, press and hold the button down while
the unit is powering up. The Power LED blinks to
acknowledge the reset request.
Fan Fan for cooling the optional internal hard drive. The fan
operates only when a hard drive is installed.
Power connector IEC Digital Entertainer Elite power cord (included).
On/Off switch Turns the Digital Entertainer Elite on or off.
Wireless antennas
(internal)
The internal wireless antennas support IEEE 802.11n,
IEEE 802.11g, and IEEE 802.11b. Keep the internal
wireless antennas clear of metallic obstructions.
Table 3. Rear Panel Description (continued)
Item Compatible Equipment and Cables