User's Manual
Table Of Contents
- RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
- Contents
- About This Manual
- Chapter 1 Configuring Your Internet Connection
- Chapter 2 Safeguarding Your Network
- Chapter 3 Protecting Your Network
- Chapter 4 Using Network Monitoring Tools
- Chapter 5 Customizing Your Network Settings
- Chapter 6 Fine-Tuning Your Network
- Chapter 7 Troubleshooting
- Appendix A Default Configuration and Technical Specifications
- Appendix B Related Documents
- Index
RangeMax Dual Band Wireless-N Modem Router DGND3300 User Manual
Configuring Your Internet Connection 1-9
v1.0, December 2008
Configuring ADSL Settings
The default ADSL settings of your modem router work fine for most ISPs. However, some ISPs
use a specific multiplexing method and virtual circuit number for the virtual path identifier (VPI)
and virtual channel identifier (VCI).
If your ISP provided you with a multiplexing method or VPI/VCI number, then enter the setting:
1. From the main menu, select ADSL Settings.The ADSL Settings screen displays.
2. In the Multiplexing Method drop-down list, select LLC-based or VC-based.
3. For the VPI, type a number between 0 and 255. The default is 8.
4. For the VCI, type a number between 32 and 65535. The default is 35.
5. Click Apply.
Note: For information about how to install ADSL filters, see the Modem Router Setup
Manual.
Note: You must use the Setup Wizard to select the correct country for the default ADSL
settings to work.
Figure 1-8