User's Manual
Table Of Contents
- NETGEAR Wireless-N 300 Router WNR2000v2 User Manual
- Contents
- Chapter 1 Configuring Basic Connectivity
- Chapter 2 Safeguarding Your Network
- Choosing Appropriate Wireless Security
- Recording Basic Wireless Settings Setup Information
- Changing Wireless Security Settings
- Viewing Advanced Wireless Settings
- Using Push 'N' Connect (Wi-Fi Protected Setup)
- Restricting Wireless Access by MAC Address
- Changing the Administrator Password
- Backing Up Your Configuration
- Understanding Your Firewall
- Chapter 3 Restricting Access From Your Network
- Chapter 4 Customizing Your Network Settings
- Chapter 5 Fine-Tuning Your Network
- Chapter 6 Using Network Monitoring Tools
- Chapter 7 Troubleshooting
- Appendix A Technical Specifications
- Appendix B Related Documents
- Index
6-1
v1.0, September 2009
Chapter 6
Using Network Monitoring Tools
This chapter describes how to use the maintenance features of your Wireless-N 300 Router Model
WNR2000v2.
This chapter includes the following sections:
• “Viewing Wireless Router Status Information”
• “Viewing a List of Attached Devices” on page 6-7
• “Managing the Configuration File” in Chapter 6
• “Updating the Router Firmware” on page 6-9
• “Enabling Remote Management Access” on page 6-13
• “Traffic Meter” on page 6-15