User's Manual

Table Of Contents

Wireless-N 300 Modem Router DGN2200 User Manual

2-9 Configuring Your Wireless Network and Security Settings

v1.0, November 2009

Click Save to save your settings or click Apply to allow your changes to take effect

immediately.

Configuring WEP

Wired Equivalent Privacy (WEP) security is the most basic and simplest form of wireless security.

It is the most often used, but least secure of the available options. WEP Shared Key authentication

and WEP data encryption block all but the most determined eavesdropper. This data encryption

mode has been superseded by WPA-PSK and WPA2-PSK.

To configure WEP data encryption:

1. Log in to the wireless-N modem router at its default LAN address of http://192.168.0.1 with

its default user name of admin and default password of password, or using whatever LAN

address and password you have set up.

2. Select Wireless Settings in the main menu.

3. In the Security Options section of the screen, select WEP (Wired Equivalent Privacy). The

WEP Security Encryption section displays:

Note: The procedures to configure WPA-PSK (TKIP) and WPA2-PSK (AES) are very

much the same. The only difference is that you select either the WPA-PSK (TKIP)

or WPA2-PSK (AES) radio button.

Figure 2-2