User's Manual
Table Of Contents
- Wireless-N 300 Modem Router DGN2200 User Manual
- About This Manual
- Conventions, Formats, and Scope
- Revision History
- Chapter 1 Configuring Your Internet Connection
- Chapter 2 Configuring Your Wireless Network and Security Settings
- Chapter 3 Protecting Your Network
- Chapter 4 Managing Your Network
- Chapter 5 USB Storage
- Chapter 6 Advanced Configuration
- Configuring WAN Settings
- Configuring Dynamic DNS
- Configuring LAN Settings
- Setting up Quality of Service (QoS)
- Advanced Wireless Settings
- Using Static Routes
- Configuring Universal Plug and Play
- Building Wireless Bridging and Repeating Networks
- Port Forwarding and Port Triggering
- Advanced USB Settings
- Traffic Meter
- Chapter 7 Troubleshooting
- Appendix A Wall Mounting and Technical Specifications
- Appendix B Related Documents
- Index
Wireless-N 300 Modem Router DGN2200 User Manual
Protecting Your Network 3-2
v1.0, November 2009
Changing the Built-In Password
1. Log in to the wireless-N modem router at its default LAN address of http://192.168.0.1 with
its default user name of admin and default password of password, or using whatever
password and LAN address you have chosen for the wireless-N modem router.
2. In the main menu, under Maintenance, select Set Password to display the following screen:
3. To change the password, first enter the old password, and then enter the new password twice.
4. Click Apply to save your changes.
Figure 3-1
Figure 3-2
Note: After changing the password, you are required to log in again to continue the
configuration. If you have backed up the wireless-N modem router settings
previously, you should do a new backup so that the saved settings file includes the
new password.