User's Manual

Wireless-N 300 Modem Router DGN2200 User Manual
4-9 Managing Your Network
v1.0, November 2009
This screen shows the following statistics:.
Click the Connection Status button to display wireless-N modem router connection status, as
shown in the following screen.
Table 4-2. Router Statistics Fields
Field Description
WAN, LAN, or WLAN The statistics for the WAN (Internet), LAN (local), and wireless LAN (WLAN)
ports. For each port, the screen displays the following:
Status The link status of the port.
TxPkts The number of packets transmitted on this port since reset or manual clear.
RxPkts The number of packets received on this port since reset or manual clear.
Collisions The number of collisions on this port since reset or manual clear.
Tx B/s The current line utilization—percentage of current bandwidth used on this port.
Rx B/s The average line utilization for this port.
Up Time The time elapsed since the last power cycle or reset.
ADSL Link Downstream
or Upstream
The statistics for the upstream and downstream ADSL link. These statistics will be
of interest to your technical support representative if you are having problems
obtaining or maintaining a connection.
Connection Speed Typically, the downstream speed is faster than the upstream speed.
Line Attenuation The line attenuation increases the further you are physically located from your
ISP’s facilities.
Noise Margin This is the signal-to-noise ratio and is a measure of the quality of the signal on the
line.
Poll Interval Specifies the interval at which the statistics are updated in this window. Click Stop
to freeze the display.