User's Manual

N300 Wireless Gigabit Router WNR3500Lv2 User Manual
Protecting Your Network 3-4
v1.0, April 2011
4. Adjust the list as needed for your network. You can add devices using either of the following
methods:
• If the computer is in the Available Wireless Cards table, select the radio button of that
computer to capture its MAC address.
• Use the Add button to enter the MAC address of the device to be added. The MAC
address can usually be found on the bottom of the wireless device.
5. Click Add, and then click Apply to save these settings. Now, only devices on this list will be
allowed to wirelessly connect to the router.
Blocking Access to Internet Sites
The WNR3500Lv2 router allows you to restrict access based on Web addresses and Web address
keywords. Up to 255 entries are supported in the Keyword list.
Keyword application examples:
• If the keyword XXX is specified, the URL www.zzzyyqq.com/xxx.html is blocked.
Figure 3-4
Note: If no device name appears when you enter the MAC address, you can type a
descriptive name for the computer that you are adding.