User's Manual

Introduction
12
ProSafe Wireless - 802.11 b/g/n VPN Firewall FVS318N
1. Cable security lock receptacle.
2. Factory Defaults button: Using a sharp object, press and hold this button for about ten
seconds until the front panel TEST light flashes to reset the VPN firewall to factory default
settings. All configuration settings will be lost and the default password will be restored.
3. DC power receptacle: 12V @ 1.0A.
Default IP Address, Login Name, and Password
Check the label on the bottom of the FVS318N’s enclosure if you forget the following factory
default information:
• IP Address: http://192.168.1.1
• User name: admin
• Password: password
When FVS318N is connected, log in by going to go to http://192.168.1.1. When the login
screen displays (see Figure 2-1 on page 2-2), enter admin for the user name and the
password for password.
Qualified Web Browsers
To configure the FVS318N, you must use a Web browser such as Internet Explorer 5.1 or
higher, Apple Safari 1.2 or higher, or Mozilla Firefox l.x Web browser with JavaScript, and
cookies enabled.
Figure 1-3
LAN IP Address
User Name
Password