Certified Wireless USB Module User Guide - Preliminary -
WUSB Module User Guide R 0.1 © Wisair 2007. All rights reserved. All right, title and interest, copyrights, patents, knowhow, trade secrets and other intellectual property relating to this publication and to Wisair products are proprietary products of Wisair Ltd. (“Wisair”). The information presented in this publication does not form part of any quotation or contract, is believed to be accurate and reliable, and may change.
WUSB Module User Guide R 0.1 Table of Contents 1 Introduction ...................................................................................................... 4 1.1 1.2 2 Key Features ............................................................................................................. 5 Package Details ........................................................................................................ 5 Software Installation.............................................................
WUSB Module User Guide R 0.1 1 Introduction The Wisair Certified Wireless USB reference design kit enables you to set up an ad hoc, Wireless network instantly, extending USB range without the need for a network infrastructure, while providing the right balance between functionality and aesthetics. It allows remote content browsing, sharing, control, multi channel streaming, hotsync, printing, fast copy and very fast information exchange between PC and USB 2.0/1.1 PC peripherals.
WUSB Module User Guide R 0.1 Figure 3: WSR601 WUSB Module for host/device– Component Side Figure 4: WSR601 WUSB Module for host/device – Print Side 1.1 Key Features Single port USB 2.0/1.1 CWUSB Host or Device Wire Adapter functionality with advanced throughput Support for Cable Association— Cable association functionality is provided by the reference design 1.
WUSB Module User Guide R 0.1 2 Software Installation 2.1 Automatic PC Driver Installation Ensure that your PC system hardware and software are both operational. Note: If your PC contains a previous HWA/DWA driver installation, please perform a proper uninstall procedure using the Control Panel>Add or Remove Programs utility 1. Ensure that the Host module is detached from the PC or the device module is detached/ switched off. 2. Run the WUSB WinDrivers.msi Wisair driver installation program.
WUSB Module User Guide R 0.1 4. Click Next >, a secondary screen displays: 5. Click Continue Anyway. Repeat as many times as the request displays (four times in total). 6. The following notice is displayed, click OK to proceed. 7. The final screen of the installer is displayed. Click Finish.
WUSB Module User Guide R 0.1 2.1.1 Connect the Host module (HWA) 8. Connect the Host module to the high speed PC USB port. The system will automatically detect and begin installation of the drivers for the connected HWA using the Found New Hardware Wizard. 9. Select No, not this time, and click Next> 10. Select Install the software automatically (recommended) and click Next> to install the first driver. 11. The Hardware Installation screen is displayed. 12. Click Continue Anyway.
WUSB Module User Guide R 0.1 15. Disconnect the Host module from the USB port. 16. It is recommended that you restart the PC in order to ensure that the USB driver installation has been successful. 17. Connect the Host module to the PC after restart. 18. In order to verify a successful installation, run the Windows Device Manager utility (Start>Run>devmgmt.msc) and verify that it recognizes the Host module driver. See Sec. 3.2.1 Verifying Driver Installation for more details. 2.
WUSB Module User Guide R 0.1 3 Maintenance 3.1 Firmware Update 1. Ensure that no more than one dongle is attached to the PC. 2. Invoke the FirmwareUpdate.exe file provided to you by Customer Support. 3. Detach and reinsert the dongle to restart the module. 3.2 Troubleshooting 3.2.1 Verifying Driver Installation To check for proper installation of drivers: In order to verify a successful installation, run the Windows Device Manager utility (Start>Run>devmgmt.
WUSB Module User Guide R 0.1 Figure 6: Windows Device Manager Window – Mass Storage Device driver indication 3.2.2 Reading Software and Firmware Version In order to ensure that you are working with the latest version of software and hardware, you can check the versions of each component as follows: Wisair application TBD PC host driver version In the Windows/System32/Drivers directory, view the file properties of the HWA.SYS and HWARadio.SYS driver files.
WUSB Module User Guide R 0.1 4 Technical Specifications Model number 601SD-D UWB Chipset Wisair WSR601 single CMOS chip Operational Range Up to 20 meters (30 to 60 feet with Line of Sight) PHY data rate 53.3Mbps to 480Mbps (Automatic or manually selected) Frequency range 3.1GHz to 4.8GHz; supporting 3 sub-bands, 528MHz each RF modulation type Multiband OFDM Max. output power -41.3dBm/MHz maximum Max Power Consumption 1.
WUSB Module User Guide R 0.1 5 FCC Statements This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
WUSB Module User Guide R 0.1 6 Testing Procedure The following is a basic testing procedure to demonstrate OFDM signal transmission from the Host side module in TFI mode. 1. Connect the Host module to the PC USB port. Wait approximately 30 seconds for hardware initialization to complete. 2. Double click the WisMan application. shortcut icon on the PC desktop to initiate the WisMan Figure 7: Initial screen 3.
WUSB Module User Guide R 0.
